REVO | VOLKSWAGEN, POLO GTI / WRC, 2.0 TFSI – TURBO K04 | ECU SOFTWARE

Revo offers some of the most substantial performance increases on the market, however, only the driven know that peak figures form part of a much bigger picture and are never the sole focus during Revo’s development process; it’s all about the drive. Only Revo offers a perfect balance of performance, economy and engine longevity.

Revo performance ECU Software gives you much more than just an increase in power and torque. A large part of development is based on driving scenarios and feedback; our calibration doesn’t just offer great dyno curves and peak power/torque figures but an exhilarating driving experience. Expect smooth and refined response at low RPM & partial throttle, with huge gains at wide-open throttle and throughout the whole rev range.

STAGE 1 ECU SOFTWARE ADDITIONALFEATURES & INFORMATION:

Stage 1 software is a must have for any standard K04 2.0TFSI. With power and torque increases throughout the entire rev range and very smooth power delivery, Revo Software gives the 2.0T K04 the performance it should have had in standard form. With adjustable settings for boost, timing and fuelling, the vehicle is set up to suit the conditions, fuel quality and drivers style.

STAGE 2 ECU SOFTWARE ADDITIONAL FEATURES & INFORMATION:

Stage 2 Performance Software has been specifically developed to attain the best possible performance from the 2.0TFSI K04 with a bolt on performance exhaust and quality cold air intake. Stage 2 allows you to run a sports cat without the CEL (Check Engine Light) being triggered by a ‘CAT Efficiency’ error code. Stage 2 software is boost, fuelling and timing adjustable with slightly more flexibility than Stage 1 allowing the vehicle to be setup to suit the fuel quality, driving conditions and driver preferences. 2.0TFSI K04 Stage 2 software is specifically tuned to suit the limitations of the standard high pressure fuel pump limiting the mid-range and giving a fantastic linear power delivery.

STAGE 2+ ECU SOFTWARE ADDITIONAL FEATURES & INFORMATION:

Stage 2+ Performance Software has been specifically developed to attain the best possible performance from the 2.0TFSI with the bolt on performance modifications as per Stage 2, however is specific to cars with up-rated high pressure fuel pumps. Power increases depend very much on the hardware, settings and fuel being used. The up-rated fuel pump allows much more power throughout the rev range but specifically throughout the midrange where the stock pump is insufficient. Stage 2+ software is boost, fuelling and timing adjustable allowing the vehicle to be setup to suit the fuel quality, driving conditions and driver preferences.

STAGE 3 ECU SOFTWARE ADDITIONAL FEATURES & INFORMATION:

Stage 3 performance software has been developed to suit our recommended hardware upgrade package. Extensive testing and experience with the 2.0TFSI engine showed that the GT series 3071R turbo is the perfect solution for a turbo upgrade, Revo software allowing the turbo to spool as quick as some of the lower spec. turbo’s sometimes used for this engine and giving huge improvements throughout the mid and top end. Tuning is adjustable and can be tailored to suit your needs. Stage 3 software is designed to be run with all of the bolt on hardware listed in the requirements and can be setup to work with a completely standard engine. For this software to run efficiently and reliably, a strict hardware build list must be adhered to. Furthermore, our SPS is highly recommended to guarantee optimal performance gains.

STAGE 4 ECU SOFTWARE ADDITIONAL FEATURES & INFORMATION:

Stage 4 2.0TFSI Performance Software is designed for those customers that want the ultimate from their 2.0TFSI. Whilst Stage 3 software is designed to be run with all the bolt on hardware, Stage 4 is the next progression and has been developed to maximise the potential of cars running fully built engines with uprated valve-train. Stage 4 software is a full ‘Race’ map, giving performance levels that could embarrass most supercars. With an 8000rpm rev limit, a very wide range of adjustment Stage 4 software has a lot of flexibility allowing your car to be setup to suit your requirements accounting for race fuel and water meth if you choose to. It is also fully compatible with external boost controllers for those that really want to push things to the next level. Power/Torque output depends very much on the setup and specific hardware used.

NOTE:
Power is dependant on Fuel Quality, Performance Settings and Conditions.

Price displayed will vary depending on and discounts may apply:
– If there is any existing ECU software on your vehicle.
– If you have exisiting Revo ECU software on your vehicle and you’re going up through the stages.

Vehicle Fitment for this product

Please be aware, this list of compatible vehicles is taken from data provided by the supplier. It is recommended, if you’re unsure, to contact us first before placing an order.

• Volkswagen > Polo MK5 (2009-2017) > Polo R WRC (220ps) 2013-2014
• Parts > Vehicle Tuning > Revo ECU Software

We’re providing you with an all in one, supply and fit, performance parts solution which is facilitated by our network of trusted, reputable Quattro-Tech sites across Cambridgeshire.

Any products ordered will be delivered to your chosen Quattro-Tech site at checkout for fitment.

A member of our team will be in touch with you directly, via phone or email, once you have completed your order to discuss a date and time for fitment at your chosen site location.

You will then receive an order confirmation email with the full details of your’ booking, including parts ordered, site location, date and time.

ORDER, ARRIVE AND DRIVE.

Do you have a question?

If you have a question about this product, just fill in the form below. We’ll get back in touch as soon as possible.