REVO | VOLKSWAGEN, GOLF VI, 2.0 TSI-TURBO | 210ps | ECU SOFTWARE

Revo offers some of the most substantial performance increases on the market, however, only the driven know that peak figures form part of a much bigger picture and are never the sole focus during Revo’s development process; it’s all about the drive. Only Revo offers a perfect balance of performance, economy and engine longevity.

Revo performance ECU Software gives you much more than just an increase in power and torque. A large part of development is based on driving scenarios and feedback; our calibration doesn’t just offer great dyno curves and peak power/torque figures but an exhilarating driving experience. Expect smooth and refined response at low RPM & partial throttle, with huge gains at wide-open throttle and throughout the whole rev range.

STAGE 1 ECU SOFTWARE FEATURES & INFORMATION:

Stage 1 software is a must have for any standard 2.0TSI. With power and torque increases throughout the entire rev range and very smooth power delivery, Revo Software gives the 2.0TSI the performance it should have had when originally released. Most people directly compare the 2.0TSI engine to the 2.0TFSI K03 engine found earlier cars, in reality it really is a step above. The engine has so much torque, power is instantaneous and available throughout the entire rev-range. It’s such a flexible engine, with smooth and progressive power delivery ensuring both significant performance increases and no loss in drivabiltiy. The car feels so much stronger than you’d expect, overtaking comes easily and you can be upto license losing speeds with the bat of an eyelid. Stage1 software removes the speed limit and increases the rev limit from 6800rpm to 7000rpm.

STAGE 2 ECU SOFTWARE FEATURES & INFORMATION:

Stage2 Performance Software has been specifically developed to attain the best possible performance from the 2.0TSI with a bolt on performance exhaust and quality cold air intake. Stage 2 allows you to run a sports cat without the CEL (Check Engine Light) being triggered by a ‘CAT Efficiency’ error code. Stage 2 software also has a stock mode and three performance modes allowing the vehicle to be setup to suit the fuel quality and driving conditions.

REQUIRED HARDWARE FOR STAGE 2:

Turbo Back Exhaust with a Sports Cat
High Flow Intake System with correct MAF scaling

RECOMMENDED HARDWARE FOR STAGE 2:

Uprated Intercooler
Uprated Engine Mounts
Uprated Throttle Pipe

STAGE 3 ECU SOFTWARE FEATURES & INFORMATION:

Stage3 software has been designed to complement the Revo Stage3 hardware package for transverse engine Audi, SEAT, Skoda and Volkswagen 2.0TSI vehicles. With the larger turbo-charger and supporting Stage3 software, the 2.0TSI engine is given an entirely new lease of life, with over 360bhp and 360ftlb along with increases throughout the rev-range making for not just a powerful car but a true all-round performance car. Whether you have a 2.0TSI Gti, LeonFR, Scirocco, or even a VW Tiguan a Revo Stage3 package will give you an incredibly capable and rewarding vehicle to drive.

The Revo 2.0TSI Stage 3 K04 Turbo kit combined with Revo Stage 3 software can give up to 175hp and 170lbft peak increases over standard quoted figures with smooth power delivery and excellent drivability. The turbocharger system benefits from an integrated diverter valve mount as found on the OEM turbocharger unit meaning there is no requirement to relocate the diverter valve, as well as this the OEM baffle has been removed to increase flow allowing optimum performance from the turbocharger. Included in the package are all the gaskets, studs and seals required to mount the unit to your vehicle. We recommend that your turbocharger system is fitted by a professional workshop, please see our website for contact details of an authorised dealer near you.

REQUIRED HARDWARE FOR STAGE 3:

Revo 2.0TSI K04 Turbo Kit
Revo Cold Air Intake
3” Turbo Back Exhaust
Revo Front Mount Intercooler
Uprated sparkplugs (NGK Iridiums recommended)

RECOMMENDED HARDWARE FOR STAGE3:

Revo Engine Mount Kit
Revo Throttle pipe
Uprated Clutch

NOTE:
Power is dependant on Fuel Quality, Performance Settings and Conditions.

Price displayed will vary depending on and discounts may apply:
– If there is any existing ECU software on your vehicle.
– If you have exisiting Revo ECU software on your vehicle and you’re going up through the stages.

REQUIRED HARDWARE FOR STAGE 2:

Turbo Back Exhaust with a Sports Cat
High Flow Intake System with correct MAF scaling

RECOMMENDED HARDWARE FOR STAGE 2:

Uprated Intercooler
Uprated Engine Mounts
Uprated Throttle Pipe

—

REQUIRED HARDWARE FOR STAGE 3:

Revo 2.0TSI K04 Turbo Kit
Revo Cold Air Intake
3” Turbo Back Exhaust
Revo Front Mount Intercooler
Uprated sparkplugs (NGK Iridiums recommended)

RECOMMENDED HARDWARE FOR STAGE3:

Revo Engine Mount Kit
Revo Throttle pipe
Uprated Clutch

Vehicle Fitment for this product

Please be aware, this list of compatible vehicles is taken from data provided by the supplier. It is recommended, if you’re unsure, to contact us first before placing an order.

• Volkswagen > Golf MK6 (2009-2013) > Golf GTI (210ps) 2009-2013
• Parts > Vehicle Tuning > Revo ECU Software

We’re providing you with an all in one, supply and fit, performance parts solution which is facilitated by our network of trusted, reputable Quattro-Tech sites across Cambridgeshire.

Any products ordered will be delivered to your chosen Quattro-Tech site at checkout for fitment.

A member of our team will be in touch with you directly, via phone or email, once you have completed your order to discuss a date and time for fitment at your chosen site location.

You will then receive an order confirmation email with the full details of your’ booking, including parts ordered, site location, date and time.

ORDER, ARRIVE AND DRIVE.

Do you have a question?

If you have a question about this product, just fill in the form below. We’ll get back in touch as soon as possible.